6SL3210 1PE22 7AL0 SINAMICS Power Module PM240 2 with Integrated Filter KL. A M
Siemens 6SL3210-1PE22-7AL0 SINAMICS POWER MODULE PM240-2 WITH BUILT IN CL. A FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 7,5KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 11KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 355 X 140 X 165 (HXWXD), FSC PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.6
Breakout Kit for Raspberry Pi B w& 40pin to 26pin Cable
Description Introduction: This is a T-type breakout kit used for extending the GPIO interface on Raspberry Pi to breadboard. It
DRIVE; SINAMICS; G120; POWER MODULE PM240-2; 3AC380-480V; 7HP; FSB; Filter
SINAMICS Power Module PM240-2 mit integriertem Klasse-A-Filter mit integriertem Brems-Chopper 3AC380-480V+10/-10% 47-63Hz Leistung hohe Überlast: 5,5kW bei 200% 3S, 150% 57S, 100% 240S Umgebungstemperatur -10 bis +50°C Leistung geringe Überlast: 7,5kW bei 150% 3S, 110% 57S, 100% 240S Umgebungstemperatur -10 bis +40°C 291x 100x 165 (HxBxT), FSB Schutzart IP20 ohne Control Unit und Bedieneinheit freigegeben ab CU Firmware- Version V4.6 Power Module SINAMICS Power Module PM240-2 das ideale Power
-11%

Close
Elevator Variable Frequency Drive 7.5 KW
The Elevator Variable Frequency Drive is the 2nd generation dedicated elevator drive from Invertek Drives, designed to provide smooth, reliable carriage control in all elevator applications.
The compact external dimensions simplify installation, whilst optional incremental/EnDat encoder feedback interfaces allow compatibility with a wide range of motors. Invertek's renowned motor control capability ensures maximum ride comfort under all conditions, with five independent S-ramps and dedicated motor holding brake control algorithm allowing fine tuning of the system. Elevator Variable Frequency Drive also incorporates Safe Torque Off* as standard, and a range of features including Rescue Mode.Momentary Button – Panel Mount (Red)
Description It’s your basic red action button! This is a very useful, small, panel-mount momentary switch. It is a SPST
Siemens SINAMICS G120 Control Unit
SINAMICS G120 CONTROL UNIT CU240E-2 E-TYPE SAFETY INTEGRATED STO RS485-INTERFACE, USS-PROTOCOL 6DI, 3DO, 2AI, 2AO, MAX 1F-DI PTC/KTY INTERFACE USB- AND SD/MMC-INTERFACE PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE AND PANEL
SINAMICS G120 Basic Operator Panel (BOP-2)
Siemens Basic Operator Panel for use with G120C Series